Proaim 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head

$1,425.00
SKU : P-14-JS-SRPP

Hollywood style camera moves combining crane and remote controlled 360-degree pan and tilt-head shot framing, made easy with our fully featured 14’ jib/head combo. Pictures as perfect as your imagination. You have an unbeatable combination sure to challenge creative minds and capture amazing results. Proaim 14ft camera crane with jib stand and sr. pan tilt head features ribbed section camera crane arm body for high strength and machined intersecting joints for quick and secure assembly.


camera crane 

For Commercial/Wedding/Documentary/Independent/Professional Video Makers


Sr. Pan tilt head with joy stick control features360 degree end-less tilting movement and 360 degree panning movement with reversal point. The Proaim Zoom Control for DV Cameras is a universal controller for LANC and Panasonic Mini DV or HDV cameras and PROAIM 12V POWER PACK a high power, professional battery pack designed for portable and uninterrupted applications. Adding production value through shot selection just got a whole lot easier with PROAIM 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head


camera jib boom 

"WHAT YOU SEE, IS WHAT YOU GET"

proaim logo


FEATURES

- High quality camera crane perfect for any demanding angle
- 4 Ribbed sections for superior (7 times more) strength-reinforced engineering design.
- Fully adjustable metal wire system for superior stability
- Control Handle adjusts camera tilt
- Uses home style exercise weights with a one inch mounting hole
- Fixed camera angle when controlling handle 'pin locked'
- Stores in four easy to transport sections
- Quick, Flexible & dynamic champion for all locations
- Portable and very easy to carry
- Non-slip feet
- Fully controllable Pan Tilt to capture numerous angles
- 2 gear design for easy 360 degree operation
- Performance engineered with two 12 volt motors
- Supports cameras up to 10 pounds
- Consistent run speed even at slowest setting
- 100% Satisfaction Guarantee



PROAIM 14FT CAMERA CRANE

HIGH CAPACITY CAMERA BASE PLATFORM
Our ultra-smooth, high-capacity Camera Base platform is built to exacting standards with beefy construction for a remarkably stable point. Superior design and the finest components set this base platform apart from those used in other video crane systems. Tilting movements of it are performed with the controlling handle.

pan tilt head

RIBBED SECTION CAMERA CRANE ARM BODY FOR HIGH STRENGTH
4 Ribbed sections for superior strength support cameras up to 15lbs without Head and 10lbs when using with head. Camera Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The heavily reinforced, cable-tensioned design of the Proaim 14ft camera crane allows it to reach farther and higher without any sacrifice in stability or performance.

camera jib with stand

MACHINED INTERSECTING JOINTS FOR QUICK AND SECURE ASSEMBLY
Intersection joint assembly allows for quick and secure connection. A solid stainless steel thumbscrew assures a tight and secure fit from above and below the camera crane arm.

video crane

CENTRAL FORK WITH THRUST ROLLER BEARINGS TO HOUSE
HEAVY AXIAL LOADS AND SHOCK LOADS

The fork provide you a maximum stability, smooth movements , up and down jerk free action shots as well as left and right sleek style shots. Thrust needle roller bearings are fitted with a form-stable cage to reliably guide and keep many needle rollers. These bearings provide a high degree of stiffness within a minimum axial space. These bearings enable to house heavy axial loads and shock loads.

camera jib

LOCKING PINS FOR STABLE OR MOVING SHOTS
High strength SS locking pin is used at the pivot point, and is attached by lanyard to prevent them from ever being lost.
- The control handle can be unlocked by releasing the locking pin to get moving shots.
- You can achieve fixed camera angles when controlling handle is pin locked.

tripod jib

CABLES AND COUPLINGS
Our modular cable system boosts camera crane stability and rigidity. The superior-quality cable tensioning system keeps the 14ft camera crane taut, rock solid and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime.

camera jib with stand

LCD MOUNTING PROVISION
The LCD Mounting Arm for LCD Monitor comes with this camera crane.

video jib

WEIGHT - CLOSERS (INCLUDED)
Stronger Hi-tensile weight closers help to achieve perfect balance.

dslr pan tilt

PROAIM Sr. PAN TILT HEAD
The Proaim 14' camera crane can be used without our Pan Tilt Head. Simply remove four screws from the Camera Crane - Camera Platform and mount your camera in place of the head. Simply remove one pin to enable manual tilting of the camera. It can be operate with one hand using auto-tilt mode. Height Range from ground level 13.5' while tripod adjusted at height range of 5'.


pan tilt head

Tilt the camera independently


JOYSTICK CONTROL
-   The Joystick control system includes a 7.5 mt long operating cable and AC adapter.
-   Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm.

SUPERB PROPORTIONAL CONTROL

-  Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves.
-  Joystick is touch sensitive.
-  Small movement – less speed.
-  More movement – more speed.


FREE PROAIM 12V POWER PACK
PROAIM 12V POWER PACK is a high power, professional battery pack designed for portable applications. It is the most powerful block battery available in the market. PROAIM 12V POWER PACK is highly simple, no-nonsense and affordable block battery that has no travel restrictions.


camera jib with stand

Complete power supply solution for long hours shooting



IMAGE GALLERY


camera jib boom

Gets you sweeping crane shot that captures your audience's attention


  14FT RIBBED JIB CRANE SPECIFICATIONS
  Weighing Capacity maximum 8kg (17.6 lbs)
  Variable shooting lengths 12ft , 9ft
 Material Used CNC made Aluminum Powder Coated
 Jib Arm Shape Rectangle
 Jib Arm Break downs into 4 Parts
 Length of Jib sections 3. 5ft each
  Camera Mount Bolt ¼”-20 and 3/8”-16
 Jib Section Jointers Silver Aluminium
 Bearing at Centre Fork Pan Thrust bearing with washer made of stainless steel
 Camera Tilt Angles Up to 270 degree
 Locking Pin Stainless steel locking pin for stable or tilt camera angles
 Jib Pan Lock No
 Jib Tilt Lock No
 Height Range from ground level 15 ft. when stand height adjusted at 5ft
 Length from tripod to Camera Mount 13’ 9’’
 Total jib arm length 10.3ft
 Camera Mount plate Rectangle( 10.5cm X 9cm )
 Camera Platform Levelling By stress cable Stress Cable made of metal with adjusting turn buckle hook
 Weight Holder Rod Made of MS Nickel chrome,
Length : 355mm
Dia : 25mm
 Weight Closures 2pc. Made of MS Nickel chrome
 Horizontal Movement Yes
 Vertical Movement Yes
 Horizontal/Vertical Movement Lock No
  LCD Mount Provision Yes
  Weight 16kgs

 BALANCING CHART
  Add Counter Weights in the rear section of Jib according to Camera and Pan Tilt Head weight as per this chart : The jib has a varying weight ratio depending on the length you have chosen.

The 14 jib arm itself balances at about11kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.

The 12ft jib arm itself balances at about 4kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.

The 9ft jib arm itself balances at about 3kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 3 and you will know how much weight to buy.

Buy a few extras in case you add other accessories.


CAMERA JIB STAND

-  Made of Aluminum Black anodized
-  Base spread - 32"- 48"
-  Height adjustment - 44"- 80"
-  Completely collapsed height - 46"
-  Outer Dia of top part of Stand - 50mm
-  Makes the camera jib arm stable & solid as a rock
-  Safety Pin for Secure Pole
-  Weight capacity of the stand is 200lbs (90kg)


  PAN TILT HEAD SPECIFICATIONS
  Pan-Tilt Material High Grade Aluminium
  Maximum Camera Package Load Capacity 5kg (Including head )
 Pan movement 360 degrees
 Tilt movement 360 degrees
 Speed Variable-controlled speed from 6 degrees/sec (low speed) to 51 degrees/sec (high speed)
Slowest Speed : 2 minutes
Highest Speed : 7 seconds
 Motors Two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees
 Gears 2- Big Aluminum Gears (Dia-88mm)
2- Small Brass Gears (Dia-13.5mm)
  Minimum height of head 18.5 inches
 Maximum height of head 26 inches
 AC Adapter input AC 100 - 240V ; output - DC 12V -2A
 Cable Length 7.5 meter
 Cable Connector 4-Pin XLR
 Battery Cable 3 Meter long
  Weight of Pan Tilt 3kg
  Carrying Bag Dimensions 50 X 35 X 19 cm

  JOYSTICK CONTROLLER
 Joystick Controller 2-Axis
 Connectors 2x 4-Pin XLR male connectors
 Pan/Tilt Direction Yes
 Upgraded with Damping knob

-  Proaim 14ft Video DSLR Camera Jib
-  Proaim Jib Stand
-  Sr. Pan Tilt Head with Joystick Box
-  LCD Monitor Arm
-  Universal Adapter
-  AC Adapter
-  Cable with Connector
-   Proaim Lanc Zoom Controller (P-ZC-3DV)
-  Proaim Power Pack
-  Storage Bag

x