What’s the lowest height the setup can reach, and how much vertical movement is available at different extension distances?

The lowest height of the Proaim Powermatic Scissor Pro (17ft) primarily depends on your tripod configuration. Typically, the jib arm operates at around 6.3 ft from the ground, but with the tilt mechanism and underslung gimbal mounting, the camera can be positioned down to ground level for low-angle shots.

In terms of vertical movement, the available up-and-down travel increases as the scissor arm is extended. At full extension (17 ft), the system can achieve a maximum height of approximately 17.4 ft. Simply put, greater extension provides a wider vertical movement range, with the maximum vertical travel available at full reach.

What's the best way to attach Tilta Remote Control Handle for Advanced Ring Grip for RS 2 and RS 3 Pro?

The Tilta Remote Control Handle for Advanced Ring Grip for RS 2 and RS 3 Pro can attach with a standard NATO rail. It should be possible to mount this handle controller with a NATO rail attachment and an appropriate clamp, such as a Manfrotto Super Clamp.

Can speed and damping be adjusted while operating?

Yes, the upgraded remote controller allows speed control, damping adjustment, direction lock, and expansion/retraction control for precise camera moves.

Is the movement smooth and quiet during operation?

Yes, the crane uses high-speed 70 steel bearings that ensure smooth, stable, and low-noise movement, especially at controlled speeds.

How far does the scissor jb extend?

The Scissor Jib extends up to 17 feet, allowing smooth push-in and pull-out shots.

Is there a bazooka that can carry this jib?

Yes, you can use the BZ-286-00 Bazooka, which supports up to 200kg.
To use the scissor crane with the bazooka, you will also need the AP-MTCL-SCSR and MA-293-00 accessories.

Does "flat base" mean it mounts to a Mitchell base with a locating flange/pin? Can it be mounted to Ronford HD legs?

No, this jib can only mount on flat base tripod but if your tripod has the Mitchell base than you can convert it in flat base with the help of AP-MTCL-SCSR adapter as it helps to convert Mitchell base to flat base. Here is the link for your reference:
https://www.proaim.com/products/proaim-mitchel-base-for-powermatic-scissor-jib

Is the pan axis motorized?

No, the pan axis is manual and not motorized.

Can the jib arm be locked so it doesn't fall over when letting go?

Yes, Jib arm has a pan and tilt lock mechanism.

How much load capacity does the tripod need to have?

The payload capacity of the tripod stand should be:
On Maximum Height: 180 kg / 395 lb
On Minimum Height: 250 kg / 550 lb

Is there a circular track accessory?

No, currently we do not have a curved track accessory for Proaim Powermatic Scissor 17' Telescopic Jib Arm.

What is the weight of the crane in the case?

33kg.

Does Proaim Powermatic Scissor Telescopic Camera Jib Crane with New Remote Controller include the tripod and dolly as well?

The Proaim Powermatic Scissor Pro 17ft Telescopic Camera Jib Crane w New Remote Controller (Dampening & Speed Control) JB-SCSR-02 includes the Scissor Jib Crane and New Remote Controller only.
You can purchase the compatible tripod and dolly via below link:
TP-GVTY-01: https://www.proaim.com/products/proaim-gravity-heavy-duty-tripod-flat
DL-ANCR-02: https://www.proaim.com/products/proaim-anchor-heavy-duty-studio-camera-tripod-dolly

I purchase a scissor crane. Do you have an instructional video on how to put it together?

Below is the video of how to assemble Proaim Powermatic Scissor 17ft Telescopic Camera Jib Crane JB-SCSR-00:
https://www.youtube.com/watch?v=cbURj6fWOK8

Can I please order the new precise remote for my scissor jib? The old remote is really hard to work with.