The Most Commendable, Stable, versatile, lightweight and affordable Vest/Arm stabilization system by Flycam offers your camera stabilizer to shoot professional & smooth tracking videos. Flycam Arm and Vest for video stabilizer allow capturing unparalleled dynamic shots without tiring your arms. The Comfort fit units provides fatigue free shooting and allow the camera operator to walk, run, go up and down stairs, shoot from moving vehicles, and travel over uneven terrain without any camera instability. The CNC machined anodized aluminum Dual Arm and durable fabric crafted foam padded vest isolates camera from your body's motion, keeping the handheld stabilizer in a balanced state to ease operator stress over lengthy shots.
"WHAT YOU SEE IS WHAT YOU GET"
Video is for demonstration only
Actual Product may vary due to Product Improvements
The lightweight & foam padded Vest plays a significant role in eliminating the stress on arms due to holding the handheld stabilizer for long hours.
1) Universal Fit
The vest fits easily on all body types as it features height adjustment & Velcro straps. Height can be adjusted by simply pulling the pin given at chest plate and you can loosen or tighten the vest for a comfortable fit by adjusting the Velcro straps.
2) Sturdy Connector
The arm fits easily & securely into a solid aluminum connector that keeps the camera set up safe.
3) Comfortable & Easy to wear
The vest is made of soft & comfortable fabric and is padded with specially chosen foam so that you can wear it during long hours of shooting. Push-fit buckles make it easy to wear.
Shock Absorbing Arm
The Shock Absorbing Comfort Arm is what lets you capture completely smooth and gentle movements. The dual spring present in the arm isolates any body movement from the camera to capture shots with precise and elegant control. Dual spring arm also allows you to take a wide range of motion.
1. Changeable Spring
You will get two springs with coloured caps. The blue one will be used for camera setup of 2-5kg/4.4-11lb & the red one will be for 5-10kg/11-22lb.
2. Tension Adjustment Knob
Just turn the knob & you can easily adjust the tension of the spring depending upon the weight of the setup.
Ergonomically designed for hours of shooting without undue fatigue
Dual Spring Arm
- Construction: CNC Machined Aluminum
- Supports 16mm diameter Stabilizer Post
- Load Capacity up to 10kg / 22lb
- Blue Spring Payload: 2-5kg / 4.4-11lb
- Red Spring Payload: 5-10kg / 11-22lb
- Maximum Length: 18inch
- Bag Dimensions LxWxH: 80 x 27 x 11.5cm
- Material - Aluminum and Breathable Synthetic Fabric
- Waist Size - 28” to 60”
- Arm & Vest Weight: 6kg / 13.2lb
- Weight with Packing: 8.4kg / 18.5lb
- Volume Weight: 11.5kg / 25.3lb
- Flycam Galaxy Steadycam Arm
- Flycam Galaxy Steadycam Vest
- Storage Case
Q : What are the minimum and maximum chest and waist sizes the vest will fit ?
Ans : The Vest will fit to the sizes as follows :
Minimum Chest Size : 38 inches
Minimum Waist Size : 28 inches
Maximum Chest Size : 52 inches
Maximum Waist Size : 60 inches
Q : Can i put larger cameras or just a dslr ?
Ans : Yes, you can put a variety of cameras as this arm and vest will perfectly work for total weight up to 10kg(21lbs). We provide two springs with the Galaxy Arm, Blue marked spring is for 2-5kg and the Red marked spring is for 5-10kgs. It does take considerable time and practice to learn but the vest and arm will help with fatigue and getting steady shots. The build quality is surprisingly good.
Q : Do the vest and arm help with stabilization?
Ans : Yes it does help, however the most important part of stabilization is first balancing the camtree initially. That would mean placing all items that will be used on the day of shooting (ie, Monitor, Battery, Camera, Lens, Wires, additional mounts, etc) for proper accuracy in the balancing process. It will take some time to correctly balance, but once you have the correct balance of the stabilizer, the arm and vest will be extremely helpful in the final stabilization.
Q : Does the camtree Stabilizer comes with the vest ?
Ans : No, It comes with an Arm and Vest only. The Camtree stabilizer is ‘NOT INCLUDED’ in this kit.
Q : Will this work with a glidecam 4000 and hd series?
An : Yes, it will perfectly work with your glidecam stabilizer.
Q : What is the shipping weight of this kit? it does not include table champ? thanks!
Ans : The shipping weight is around 23lbs or 11kg. It does not come with a table clamp.
Q : What is the diameter of the main shaft?
Ans : The main shaft (spool adapter) has the diameter of 16mm. We provide two bushes to add onto it to make it easily adaptable to the stabilizers with the handle’s inner diameter of 19mm and 22mm.
Q : Does the vest have a carrying case too?
Ans : No, The vest doesn’t come in a carry case.
Q: Is it returnable for a full refund if it doesn’t meet my expectations upon delivery?
Ans: Yes, absolutely. We always backup our sales. In case, you don't like the product, we take it back within 14 days and you get a 100% refund.
Q: What is the warranty?
Ans: We provide 1 year warranty from the date of purchase. Items which are covered by the warranty period will be replaced at no cost to the customer. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired.